FIXOBOND PC 80 A SR ADHESIVE
Specifications
- Base Synthetic Rubber.
- Application Leather, rubber, canvas, wood, flooring, automobile body decor and similar other. Solvent Aromatic and Aliphatic solvent combination.
- Colour Light Tan.
- Viscosity 1900 ± 50 cps at 30o± 5oC.
 |
| FIXOBOND PC 80 A SR ADHESIVE |
Method of Application
- Make sure that the surfaces to be bonded are clean, dry and properly degreased. Smooth surfaces are to be buffed or etched with sand paper and the loose particles removed. Apply an effective even coat of adhesive on both the cleaned surfaces to be bonded, and allow the solvent to evaporate in next 10 - 15 minutes. For better result, double coat is recommended on porous substrates. Place the coated surfaces one over the other beginning from one end. Press firmly for a proper overall contact. Leave at least for 24 hours to achieve final bond strength.
Caution
- Highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.place.
Pack Sizes
- 25 Ltr, 5 Ltr,1 Ltr, 500 ml, 200ml.
Special Instruction
- Shake the container before use.
UTILITY OF FIXOBOND PC 80 A SR ADHESIVE
- Canvas Bonding With Rubber
- Wood Bonding
- Car Body Decor
- Flooring
