AMADUR HARDENER H-20 (ISOCYANATE)

AMADUR HARDENER H-20 (ISOCYANATE)

Specifications

• Base                     :         Formulated polyisocyanate 

• Application         :

                                                 1. As hardener with Polyurethane based / natural or Synthetic Rubber based adhesive.
                                                 2. As "Bonding Agent" for rubber - metal bonding. 

• Solvent                :                     Chlorohydrocarbon.   

• NCO Content     :          14 - 15%.   

• Viscosity              :         3 - 5 cps at 30ºC.

DENDRITE CL-10

 COLOURLESS PRIMER

Method of Application

• 1.The adhesive either of natural, synthetic rubber or polyurethane base is to be mixed with the hardener Yamadur H-20. The percentage of cross linking agent to

DENDRITE CL-10 COLOURLESS PRIMER

DENDRITE CL-10 COLOURLESS PRIMER

Specifications

• Base                      :               Modified Isocyanate 

• Application          :               This is used as a colourless hardener for polyurethane based adhesive and it is suitable for bonding TPR to light colour synthetic upper in sports shoe. 

• Solvent                 :                Ester solvent.  

• NCO Content      :                8.5 ± 0.5 %.  

• Viscosity              :                10 – 20 cps at 30 ± 2°C.

DENDRITE CL-10 COLOURLESS PRIMER

Method of Application

• Dendrite CL – 10 is added @ 5% weight basis and mixed thoroughly with polyurethane adhesive before application to attain better durability of bonded surfaces, resistance to higher service temperature and wider bonding range.

DENDRITE GENERAL PU 201 PU ADHESIVE

DENDRITE GENERAL PU 201 PU ADHESIVE

Specifications

• Base                   :           Polyurethane Elastomer. 

• Application        :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22.

• Solvent               :          Ketonic with aromatic solvents. 

• Viscosity            :           500 - 650 cps at 30º ± 5ºC.

DENDRITE GENERAL PU 201 PU ADHESIVE

Method of Application

• Both the substrates to be bonded are to be made free from impurities including dust, oil, grease etc. and made dry. The leather surface is to be buffed properly.

DENDRITE OR 6500 PU

DENDRITE OR 6500 PU

Specifications

• Base                       :          Polyurethane Elastomer.

• Application            :          Footwear, as a two component adhesive for bonding synthetic soles to upper in combination with proportionate Hardener Yamadur H-20 / R-22. 

• Solvent                   :          Ketonic with aromatic solvents.  

• Viscosity                :          1700 - 1900 cps at 30º ± 5&orddm;C.

DENDRITE OR 6500 PU

Method of Application

• It is preferable to use the adhesive mixed with cross linking agent (Hardener) like Yamadur H-20 in the ratio of 5% by volume in order to attain better durability of

DENDRITE SUNKIT SR ADHESIVE

DENDRITE SUNKIT SR ADHESIVE

Specifications

• Base                   :       Synthetic Rubber.

• Solvent              :       It is primarily composed of aliphatic and aromatic solvent Combination.

• Apperance        :       This is light tan viscous liquid.

• Viscosity            :      1100 - 1300 cps at 30 ± 2ºC.

DENDRITE SUNKIT SR ADHESIVE

Application

This is designed for use in upholstery, for making chair fittings, sofa fittings and foam-to-foam bonding. This is also used in footwear industry mostly for making the chappal & sandle. This adhesive is operated with in tack time 10min to 50min.

Method of Application

• Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined.

DENDRITE PC 99 MS SR ADHESIVE

DENDRITE PC 99 MS SR ADHESIVE

Specifications

• Base                 :        Synthetic Rubber.

• Application      :        This is used in footwear industry mostly for making the chappal & sandle. It is specially designed for bonding substrates, like rubber micro sole, neolite sole & synthetic upper like satin, putina etc. It can be used in upholstery, for making chair fittings, sofa fittings and foam-to-foam bonding. This adhesive is operated with in tack time 10min to 50min.

• Solvent            :        It is primarily composed of aliphatic and aromatic solvent Combination.

• Colour             :        This is light tan viscous liquid.

• Viscosity         :        1100 - 1300 cps at 30 ± 2ºC.

Method of Application

DENDRITE PC 99 MS SR ADHESIVE

• Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrates like leather may require tow coats for superiors bonding. Wait for 8 – 10 minutes to allow the solvent to evaporate. Place the coated surfaces one above the other while the adhesive remains sticky. Press the surfaces firmly together. Final strength is to be achieved after 24 hrs.

Caution

• It is highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.

Pack Sizes

• 25Lit., 5Lit., 1Lit., 500ml.,200ml.,

UTILITY OF DENDRITE PC 99 MS SR ADHESIVE

• Upper To Sole Bonding

• Sandal Manufacturing

• Foam To Foam Bonding

FIXOBOND PC 80 A SR ADHESIVE

FIXOBOND PC 80 A SR ADHESIVE

Specifications

• Base            Synthetic Rubber.
• Application Leather, rubber, canvas, wood, flooring, automobile body decor and similar other. Solvent Aromatic and Aliphatic solvent combination.
• Colour Light Tan.
• Viscosity 1900 ± 50 cps at 30o± 5oC.

FIXOBOND PC 80 A SR ADHESIVE

Method of Application

• Make sure that the surfaces to be bonded are clean, dry and properly degreased. Smooth surfaces are to be buffed or etched with sand paper and the loose particles removed.

DENDRITE SP 99 HT SPRAYABLE SR ADHESIVE

Specifications

• Base                    :      Synthetic Rubber.

• Application         :      This adhesive is designed for automobile application for fixing foam, sponge on painted metal, Aluminium foil, PP etc.

• Solvent               :       This is composed of aliphatic, ketonic and aromatic solvent combination.

• Colour                :       Light Tan to Tan.

• Viscosity            :       120 – 130 cps at 30º ± 2ºC.

DENDRITE SP 99 HT SPRAYABLE SR ADHESIVE

Method of Application

DENDRITE PREMIUM 2006 SR HIGH VISCOUS ADHESIVE

DENDRITE PREMIUM 2006 SR HIGH VISCOUS ADHESIVE

Specifications

• Base                     :      Synthetic Rubber.

• Application         :      Interior decoration, Fabric, Lamination, Leather and similar others.

• Solvent                :      Aromatic and Aliphatic solvent combination.

• Colour                 :      Light yellow.

•  Viscosity            :      3300 - 3700 cps at 30º± 5ºC.

DENDRITE PREMIUM 2006 SR HIGH VISCOUS ADHESIVE

Method of Application

Make sure that the surfaces to be bonded are even, clean, dry, and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrate may require two coats for superior

DENDRITE PC 65 SR ADHESIVE

DENDRITE PC 65 SR ADHESIVE

Specifications

• Base             :      Synthetic Rubber.

• Application  :      Suitable for Leather, Rubber and other general purpose application.

• Solvent         :     Aromatic and Aliphatic solvent combination.

• Colour          :     Tan.

• Viscosity      :     1850 - 2100 cps at 30o ± 5oC.

Method of Application

DENDRITE PC 65 SR ADHESIVE

• Make sure that the surfaces to be bonded are even, clean, dry, and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined. Porous substrate like

DENDRITE FW TAN SR ADHESIVE

DENDRITE FW  TAN SR ADHESIVE

Specifications

• Base                 :        Synthetic Rubber.

• Application      :        Footwear, Leather, Wooden heels.

• Solvent             :       Aromatic and Aliphatic solvent combination.

• Colour              :        Light yellow / Tan.

• Viscosity          :        2100 - 2300 cps at 30º ± 5ºC.

DENDRITE FW TAN SR ADHESIVE

• Method of Application

Adhesive is to be applied on both the substrates which are to be cleaned and dried before application of adhesive.