DENDRITE SR 1010 SR ADHESIVE
Specifications
- Base : Synthetic Rubber.
- Application : This is designed for footwear assembling like sole attachment and heel assembling. It can be used specially for bonding VT buff leather, MDF sole etc. This material is operated with in the tack time of 10min to 30min, depending upon substrates.
- Solvent : Aliphatic and Aromatic solvent Combination.
- Viscosity : 1900 - 2100 cps at 30 ± 2ºC.
 |
| DENDRITE SR 1010 SR ADHESIVE |
Method of Application
Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined.Porous substrates like leather may require tow coats for superiors bonding. Wait for 8 – 10 minutes to allow the solvent to evaporate. Place the coated surfaces one above the other while the adhesive remains sticky. Press the surfaces firmly together. Final strength is to be achieved after 24 hrs.
Caution
- It is highly inflammable. Replace lid immediately after partial use. Store in a cool and dry place.
Pack Sizes
- 25 Lts / 5 Lts / 1 Lt/ 500 ML.
UTILITY OF DENDRITE SR 1010 SR ADHESIVE
- Sole Attachment
- Heel Assembling
- Sole Attachment
- Footwear Assembling
