YAMADUR HARDENER R-22 ISOCYANATE

YAMADUR HARDENER R-22 ISOCYANATE

Specifications

• Base                      :          Formulated polyisocyanate. 

• Application          :          As hardener with Polyurethane based / Synthetic Rubber based adhesive. Can also be used as Bonding Agent for rubber-metal bonding. 

• Solvent                 :          Chlorohydrocarbon. 

• NCO Content       :         8.5 – 10.5%. 

• Viscosity               :         7 - 10 cps at 30ºC.

YAMADUR HARDENER R-22 ISOCYANATE

Method of Application

• 1.The adhesive either of natural, synthetic rubber or polyurethane base is to be mixed with the hardener Yamadur R 22. The percentage of cross linking agent to adhesive can vary from 3 to 7% depending on the end

AMADUR HARDENER H-20 (ISOCYANATE)

AMADUR HARDENER H-20 (ISOCYANATE)

Specifications

• Base                     :         Formulated polyisocyanate 

• Application         :

                                                 1. As hardener with Polyurethane based / natural or Synthetic Rubber based adhesive.
                                                 2. As "Bonding Agent" for rubber - metal bonding. 

• Solvent                :                     Chlorohydrocarbon.   

• NCO Content     :          14 - 15%.   

• Viscosity              :         3 - 5 cps at 30ºC.

DENDRITE CL-10

 COLOURLESS PRIMER

Method of Application

• 1.The adhesive either of natural, synthetic rubber or polyurethane base is to be mixed with the hardener Yamadur H-20. The percentage of cross linking agent to

YAMADUR HARDENER R-11 ISOCYANATE

YAMADUR HARDENER R-11 ISOCYANATE

Specifications

• Base                        :             Aromatic isocyanate 

• Application            :             This is hardener for polyurethane based adhesive. 

• Solvent                    :             Chloro-solvent. 

• NCO Content         :             12.5 ± 0.5%.  

• Viscosity                 :             15 – 25 cps at 30 ± 2°C.

YAMADUR HARDENER R-11 ISOCYANATE

Method of Application

• Yamadur R – 11 is added @ 5% weight basis and mixed thoroughly with polyurethane adhesive before

DENDRITE CL-10 COLOURLESS PRIMER

DENDRITE CL-10 COLOURLESS PRIMER

Specifications

• Base                      :               Modified Isocyanate 

• Application          :               This is used as a colourless hardener for polyurethane based adhesive and it is suitable for bonding TPR to light colour synthetic upper in sports shoe. 

• Solvent                 :                Ester solvent.  

• NCO Content      :                8.5 ± 0.5 %.  

• Viscosity              :                10 – 20 cps at 30 ± 2°C.

DENDRITE CL-10 COLOURLESS PRIMER

Method of Application

• Dendrite CL – 10 is added @ 5% weight basis and mixed thoroughly with polyurethane adhesive before application to attain better durability of bonded surfaces, resistance to higher service temperature and wider bonding range.

DENDRITE OR 3000 M PU

DENDRITE OR 3000 M PU

Specifications

• Base                        :             Polyurethane Adhesive. 

• Application            :             This adhesive very suitable for synthetic upper where low heat activation is required. It is also used for bonding different footwear substrates like leather, PVC sole, TPR sole, EVA etc. 

• Solvent                    :             This is composed of Ketonic and aromatic solvent combination. 

• Colour                    :             Slight hazy liquid. 

• Viscosity                 :             1500 – 1650 cPs for summer at 30 ± 2°C,1200 – 1400 cPs for winter at 30 ± 2°C.

DENDRITE OR 3000 M PU

Method of Application

• It is mandatory to use the adhesive mixed with cross linking agent like Yamadur H – 20 / Yamadur R – 22 @ of 3-5% by weight in order to attain better durability of bonded surfaces & resistance to higher service temperature. The bonding surfaces should be free from

DENDRITE OR 1009 (PU)

DENDRITE OR 1009 (PU)

Specifications

• Base                  :             Polyurethane 

• Application       :             This adhesive is used for bonding different footwear substrates like leather, synthetic upper, PVC sole, Air blown PVC sole, EVA sole, etc. 

• Solvent              :             This is composed of Ketonic and aromatic solvent combination. 

• Colour               :             Clear to slight hazy liquid. 

• Viscosity           :             700 – 800 cps at 30 ± 2ºC

DENDRITE OR 1009 (PU)

Method of Application

• It is mandatory to use the adhesive mixed with cross linking agent like Yamadur H – 20 / Yamadur R – 22 @ of 3-5% by weight in order to attain better durability of bonded surfaces & resistance to higher service temperature. The bonding surfaces should be free from

SONA PU 100 (PU)

SONA PU 100 (PU)

Specifications

• Base                      :          Polyurethane Elastomer 

• Application          :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22. 

• Solvent                 :           Ketonic with aromatic solvents. 

• Viscosity               :          750 - 900 cps at 30ºC.

SONA PU 100 (PU)

Method of Application

• It is preferable to use the adhesive mixed with cross linking agent like Yamadur H-20 in the ratio of 3 - 7 % by volume in order to attain better durability of bonded surfaces, resistance to higher service temperature and

DENDRITE GENERAL PU 201 PU ADHESIVE

DENDRITE GENERAL PU 201 PU ADHESIVE

Specifications

• Base                   :           Polyurethane Elastomer. 

• Application        :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22.

• Solvent               :          Ketonic with aromatic solvents. 

• Viscosity            :           500 - 650 cps at 30º ± 5ºC.

DENDRITE GENERAL PU 201 PU ADHESIVE

Method of Application

• Both the substrates to be bonded are to be made free from impurities including dust, oil, grease etc. and made dry. The leather surface is to be buffed properly.

DENDRITE OR 8100

DENDRITE OR 8100

Specifications

• Base                       :          Polyurethane Elastomer. 

• Application           :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22. 

• Solvent                   :          Ketonic with aromatic solvents.  

• Viscosity                :          2300 - 2600 cps at 30º ± 5ºC.

DENDRITE OR 8100

  Method of Application

• Both the substrates to be bonded are to be made free from impurities including dust, oil, grease etc. and made dry. The leather surface is to be buffed properly. The synthetic

DENDRITE OR 7500

DENDRITE OR 7500

Specifications

• Base                             :      Polyurethane Elastomer 

• Application                 :      Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22. 

• Solvent                         :       Ketonic with aromatic solvents.  

• Viscosity                      :        1700 - 1900 cps at 30º ± 5ºC.

DENDRITE OR 7500

Method of Application

• Both the substrates to be bonded, are to be made free from impurities including dust, oil grease etc. and made dry. The leather surface is to be buffed properly. The synthetic