YAMADUR HARDENER R-22 ISOCYANATE

YAMADUR HARDENER R-22 ISOCYANATE

Specifications

• Base                      :          Formulated polyisocyanate. 

• Application          :          As hardener with Polyurethane based / Synthetic Rubber based adhesive. Can also be used as Bonding Agent for rubber-metal bonding. 

• Solvent                 :          Chlorohydrocarbon. 

• NCO Content       :         8.5 – 10.5%. 

• Viscosity               :         7 - 10 cps at 30ºC.

YAMADUR HARDENER R-22 ISOCYANATE

Method of Application

• 1.The adhesive either of natural, synthetic rubber or polyurethane base is to be mixed with the hardener Yamadur R 22. The percentage of cross linking agent to adhesive can vary from 3 to 7% depending on the end

AMADUR HARDENER H-20 (ISOCYANATE)

AMADUR HARDENER H-20 (ISOCYANATE)

Specifications

• Base                     :         Formulated polyisocyanate 

• Application         :

                                                 1. As hardener with Polyurethane based / natural or Synthetic Rubber based adhesive.
                                                 2. As "Bonding Agent" for rubber - metal bonding. 

• Solvent                :                     Chlorohydrocarbon.   

• NCO Content     :          14 - 15%.   

• Viscosity              :         3 - 5 cps at 30ºC.

DENDRITE CL-10

 COLOURLESS PRIMER

Method of Application

• 1.The adhesive either of natural, synthetic rubber or polyurethane base is to be mixed with the hardener Yamadur H-20. The percentage of cross linking agent to

YAMADUR HARDENER R-11 ISOCYANATE

YAMADUR HARDENER R-11 ISOCYANATE

Specifications

• Base                        :             Aromatic isocyanate 

• Application            :             This is hardener for polyurethane based adhesive. 

• Solvent                    :             Chloro-solvent. 

• NCO Content         :             12.5 ± 0.5%.  

• Viscosity                 :             15 – 25 cps at 30 ± 2°C.

YAMADUR HARDENER R-11 ISOCYANATE

Method of Application

• Yamadur R – 11 is added @ 5% weight basis and mixed thoroughly with polyurethane adhesive before

DENDRITE CL-10 COLOURLESS PRIMER

DENDRITE CL-10 COLOURLESS PRIMER

Specifications

• Base                      :               Modified Isocyanate 

• Application          :               This is used as a colourless hardener for polyurethane based adhesive and it is suitable for bonding TPR to light colour synthetic upper in sports shoe. 

• Solvent                 :                Ester solvent.  

• NCO Content      :                8.5 ± 0.5 %.  

• Viscosity              :                10 – 20 cps at 30 ± 2°C.

DENDRITE CL-10 COLOURLESS PRIMER

Method of Application

• Dendrite CL – 10 is added @ 5% weight basis and mixed thoroughly with polyurethane adhesive before application to attain better durability of bonded surfaces, resistance to higher service temperature and wider bonding range.

DENDRITE OR 3000 M PU

DENDRITE OR 3000 M PU

Specifications

• Base                        :             Polyurethane Adhesive. 

• Application            :             This adhesive very suitable for synthetic upper where low heat activation is required. It is also used for bonding different footwear substrates like leather, PVC sole, TPR sole, EVA etc. 

• Solvent                    :             This is composed of Ketonic and aromatic solvent combination. 

• Colour                    :             Slight hazy liquid. 

• Viscosity                 :             1500 – 1650 cPs for summer at 30 ± 2°C,1200 – 1400 cPs for winter at 30 ± 2°C.

DENDRITE OR 3000 M PU

Method of Application

• It is mandatory to use the adhesive mixed with cross linking agent like Yamadur H – 20 / Yamadur R – 22 @ of 3-5% by weight in order to attain better durability of bonded surfaces & resistance to higher service temperature. The bonding surfaces should be free from

DENDRITE OR 1009 (PU)

DENDRITE OR 1009 (PU)

Specifications

• Base                  :             Polyurethane 

• Application       :             This adhesive is used for bonding different footwear substrates like leather, synthetic upper, PVC sole, Air blown PVC sole, EVA sole, etc. 

• Solvent              :             This is composed of Ketonic and aromatic solvent combination. 

• Colour               :             Clear to slight hazy liquid. 

• Viscosity           :             700 – 800 cps at 30 ± 2ºC

DENDRITE OR 1009 (PU)

Method of Application

• It is mandatory to use the adhesive mixed with cross linking agent like Yamadur H – 20 / Yamadur R – 22 @ of 3-5% by weight in order to attain better durability of bonded surfaces & resistance to higher service temperature. The bonding surfaces should be free from

SONA PU 100 (PU)

SONA PU 100 (PU)

Specifications

• Base                      :          Polyurethane Elastomer 

• Application          :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22. 

• Solvent                 :           Ketonic with aromatic solvents. 

• Viscosity               :          750 - 900 cps at 30ºC.

SONA PU 100 (PU)

Method of Application

• It is preferable to use the adhesive mixed with cross linking agent like Yamadur H-20 in the ratio of 3 - 7 % by volume in order to attain better durability of bonded surfaces, resistance to higher service temperature and

DENDRITE GENERAL PU 201 PU ADHESIVE

DENDRITE GENERAL PU 201 PU ADHESIVE

Specifications

• Base                   :           Polyurethane Elastomer. 

• Application        :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22.

• Solvent               :          Ketonic with aromatic solvents. 

• Viscosity            :           500 - 650 cps at 30º ± 5ºC.

DENDRITE GENERAL PU 201 PU ADHESIVE

Method of Application

• Both the substrates to be bonded are to be made free from impurities including dust, oil, grease etc. and made dry. The leather surface is to be buffed properly.

DENDRITE OR 8100

DENDRITE OR 8100

Specifications

• Base                       :          Polyurethane Elastomer. 

• Application           :          Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22. 

• Solvent                   :          Ketonic with aromatic solvents.  

• Viscosity                :          2300 - 2600 cps at 30º ± 5ºC.

DENDRITE OR 8100

  Method of Application

• Both the substrates to be bonded are to be made free from impurities including dust, oil, grease etc. and made dry. The leather surface is to be buffed properly. The synthetic

DENDRITE OR 7500

DENDRITE OR 7500

Specifications

• Base                             :      Polyurethane Elastomer 

• Application                 :      Footwear, for bonding synthetic soles with upper. it is used as a Single Component Adhesive and also can be used as Two Component Adhesive after mixing with 2-3% hardener Yamadur H-20 / R-22. 

• Solvent                         :       Ketonic with aromatic solvents.  

• Viscosity                      :        1700 - 1900 cps at 30º ± 5ºC.

DENDRITE OR 7500

Method of Application

• Both the substrates to be bonded, are to be made free from impurities including dust, oil grease etc. and made dry. The leather surface is to be buffed properly. The synthetic

DENDRITE OR 6500 PU

DENDRITE OR 6500 PU

Specifications

• Base                       :          Polyurethane Elastomer.

• Application            :          Footwear, as a two component adhesive for bonding synthetic soles to upper in combination with proportionate Hardener Yamadur H-20 / R-22. 

• Solvent                   :          Ketonic with aromatic solvents.  

• Viscosity                :          1700 - 1900 cps at 30º ± 5&orddm;C.

DENDRITE OR 6500 PU

Method of Application

• It is preferable to use the adhesive mixed with cross linking agent (Hardener) like Yamadur H-20 in the ratio of 5% by volume in order to attain better durability of

DENDRITE OR 5000 (M) PU - TOLUENE FREE

DENDRITE OR 5000 (M) PU - TOLUENE FREE

Specifications

• Base                     :      Polyurethane Elastomer. 

• Application         :      This adhesive is used in footwear application. It is a two component adhesive. This is suitably designed for bonding Leather upper to TPR sole. It can efficiently bond other synthetic upper also. 

• Solvent                 :     This is composed of ketonic & ester based solvents. It is free from Toluene, Benzene & Halogeneted Hydro carbon (Trichloroethylene, Dichloroethylene). 

• Viscosity              :      1700 – 2000 cps at 30 ± 2ºC.

Method of Application

DENDRITE OR 5000 (M) PU - TOLUENE FREE

• It is mandatory to use the hardener Yamadur R – 22/H – 20 @ of 5% by weight along with adhesive to attain better durability of bonded surfaces, resistance to higher service temperature and wider bonding range.

DENDRITE OR 5000 PU

DENDRITE OR 5000 PU

Specifications

• Base                  :       Polyurethane Elastomer. 

• Application      :       Footwear, as a two component adhesive, used in combination with proportionate Yamadur R-22 / H-20 and applied for bonding synthetic soles to Leather upper. Specially designed for TPR Soles. 

• Solvent              :       Ketonic with aromatic solvents. 

• Viscosity           :        1700 - 2000 cps at 30ºC.

Method of Application

DENDRITE OR 5000 PU

• It is preferable to use the adhesive mixed with cross linking agent like Yamadur R-22 / H-20 in the ratio of 5% by volume in order to attain better durability of bonded surfaces, resistance to higher service temperature and

DENDRITE OR 3000

DENDRITE OR 3000

Specifications

• Base                      :        Polyurethane Adhesive.

• Application          :        This adhesive very suitable for synthetic upper where low heat activation is required. It is also used for bonding different footwear substrates like leather, PVC sole, TPR sole, EVA etc. 

• Solvent                  :        This is composed of Ketonic and aromatic solvent combination. 

• Apperence            :         Slight hazy liquid.

•  Viscosity              :         1500 –1650 cps for summer at 30 ± 2°C, 1200 –1400 cps for winter at 30 ± 2°C

Method of Application

DENDRITE OR 3000

• It is mandatory to use the adhesive mixed with cross linking agent like Yamadur H – 20 / Yamadur R – 22 @ of 3-5% by weight in order to attain better durability of bonded surfaces & resistance to higher service

DENDRITE OR-1005 PU ADHESIVE

DENDRITE OR-1005 PU ADHESIVE

Specifications

• Base                    :           Polyurethane Elastomer 

• Application        :           Footwear, as a two component adhesive for synthetic soles in combination with proportionate hardener, Yamadur R-22 / H-20. 

• Solvent               :           Ketonic with aromatic solvents.  

• Viscosity             :          650 - 750 cps at 30º ± 5ºC.

DENDRITE OR-1005 PU ADHESIVE

Method of Application

• It is preferable to use the adhesive mixed with cross linking agent like Yamadur H-20 in the ratio of 5% by volume in order to attain better durability of bonded surfaces, resistance to higher service temperature and

DENDRITE OR 1000 FW PU ADHESIVE

DENDRITE OR 1000 FW PU ADHESIVE

Specifications

• Base                        :          Polyurethane Elastomer.

• Application            :           Footwear, as a two component adhesive for synthetic soles in combination with proportionate hardener, Yamadur R-22 / H-20.

• Solvent                   :           Ketonic with aromatic solvents.  

• Viscosity                 :          700 - 800 cps at 30º ± 5ºC.

Method of Application

DENDRITE OR 1000 FW PU ADHESIVE

• It is preferable to use the adhesive mixed with cross linking agent like Yamadur H-20 in the ratio of 5% by volume in order to attain better durability of bonded surfaces, resistance to higher service temperature and

DENDRITE OR 1000 PU ADHESIVE

DENDRITE OR 1000 PU ADHESIVE

Specifications

• Base                        :      Polyurethane Elastomer.

• Application            :      Footwear, as a two component adhesive for synthetic soles in combination with proportionate hardener, Yamadur R-22 / H-20.

• Solvent                    :     Ketonic with aromatic solvents.

• Viscosity                  :     950 - 1200 cps at 30º ± 5ºC.

Method of Application

DENDRITE OR 1000 PU ADHESIVE

• It is preferable to use the adhesive mixed with cross linking agent like Yamadur H-20 / Yamadur R-22 in the ratio of 5% by volume in order to attain better durability of bonded surfaces, resistance to higher service

DENDRITE IM 2010 PU INJECTION MOULDING

DENDRITE IM 2010 PU INJECTION MOULDING

Specifications

• Base                         :       Polyurethane Elastomer.

• Application             :       It is used as a primer for injection moulded PU – PVC sole.

• Solvent                    :       Ketonic solvent.

• Viscosity                  :       80 – 120 cps at 30 ± 2°C.

Method of Application

DENDRITE IM 2010 PU INJECTION MOULDING

• This primer is used along with 3 – 5% hardener Yamadur H-20 and applied on the bonding surface of synthetic upper & very soft leather. After

DENDRITE AT 104 PU SPRAYABLE

DENDRITE AT 104 PU SPRAYABLE

Specifications

• Base                          :      Polyurethane Elastomer.

• Application              :      An industrial spray able Polyurethane Adhesive for application in Auto Trims with proportionate Hardener, Yamadur H-20 / R-22.

•  Solvent                   :        Ketonic with aromatic solvents.

•  Viscosity                :        750 - 950 cps at 30º ± 5ºC.

Method of Application

DENDRITE AT 104 PU SPRAYABLE

• Both the substrates, to be bonded, are to be made free from impurities including dust, oil, grease etc. and made dry. For complete evaporation, the synthetic surface is kept in the open atmosphere for minimum 15 minutes. A thin layer of adhesive is to be applied on both the surfaces to be bonded, Both surfaces are to be kept for solvent evaporation for 10 minutes. The two substrates are then bonded after heat activation under uniform pressure while hot. Final strength will be achieved after 24 hrs.

DENDRITE SPECIAL SPRAYABLE GENERAL

DENDRITE SPECIAL SPRAYABLE GENERAL

Specifications

• Base                         :          Synthetic Rubber.

• Application             :         Most suitable for any large area where brushing is neither possible nor economical; in industries like seat making, liner fixing, furniture and similar others.

• Solvent                     :         Aromatic and Aliphatic solvent combination.

• Colour                      :         Light yellow.

•   Viscosity                 :         110-130 cps at 25º ± 5ºC.  

Characteristics:

DENDRITE SPECIAL SPRAYABLE GENERAL

•  Cover wide area

•  Optimum particle size distribution

FIXOBOND PC 80A FW SR ADHESIVE

FIXOBOND PC 80A FW SR ADHESIVE

Specifications

• Base                    :          Synthetic Rubber.

• Application         :          This adhesive primarily designed for footwear assembling. It can be used for bonding EVA to leather, Microsole to Leather and many other common footwear substrates. This adhesive is operated with in tack time 10min to 60min depending upon different substrates.

• Solvent                :        This is composed of aliphatic and aromatic solvent combination.

• Viscosity             :        1700 - 2000 cps at 30 ± 2ºC.

Method of Application

FIXOBOND PC 80A FW SR ADHESIVE

• Make sure that the surfaces to be bonded are even, clean, dry and free from grease/oil. A coat of adhesive is to be applied uniformly on both the surfaces to be joined.